Stainless Steels

Mir 50® Bushing Stock

Corrosion Resistant Stainless Steel

Mir 50 Bushing Stock is a (modified) Custom 450® stainless steel that blends toughness and corrosion resistance into one steel. Mir 50 Bushing Stock is a precipitation hardening, martensitic stainless steel. Typical hardness is 258/294 BHN. It is offered in a rough machined condition both OD and ID for proper clean-up allowance.

The material provides excellent serviceability in a variety of industrial applications in the food processing, chemical and paper industries. It is well-known as the “4340 of the stainless world.” Agency concurrences includes API-6A, FDA, AMS-5763 (chemistry only) and NACE MR-01-75-097 revision.

Consider using Mir 50 Bushing Stock in place of certain commercial grade stainless steel including: 416, 410, 17-4PH, 304L, and 316L depending upon the requirement. Call or email us for a quote.

Spacing

Features

High Strength

Galling Resistant

Corrosion Resistant

Fatigue Resistant

Double Stress Relieved

Low Memory

Machinable

Weldable

Sour Service Approved

.

Agency Concurrence

NACE MR0175-97

AMS-5763 (chemistry)

FDA and API-6A

Spacing

Typical Properties*

Hardness258/294 BHN
Tensile 140,000 P.S.I.
Yield 108,000 P.S.I.
Elongation in 2″26%
Reduction of Area65%
Charpy “V” Notch 105 @ 70°F

*Based on 1/2″ test piece

.

Service Temperature

800°F (constant); Oxidation Resistant to 1200°F

Available Sizes1

2″ OD x 1″ ID
2-1/2″ OD x 3/4″ ID
2-1/2″ OD x 1″ ID
3″ OD x 1-1/2″ ID
3-1/2″ OD x 1-1/2″ ID
4″ OD x 2″ ID
4″ OD x 3″ ID
4-1/2″ OD x 2-1/2″ ID
4-1/2″ OD x 3-1/2″ ID
5″ OD x 3″ ID
5-1/2″ OD x 3″ ID
5-1/2″ OD x 3-1/2″ ID
6″ OD x 3″ ID
6″ OD x 3-1/2″ ID
6-1/2″ OD x 3″ ID

1Certain sizes may have modified analysis relative to production requirements.

.

Lengths

Custom Cuts

Spacing

Applications

  • Bushings
  • Wear Rings
  • Collars
  • Sleeves
  • Hex Nuts
  • Washers

Custom 450® is a registered trademark of Carpenter Technology Corporation.

.

Supplied rough machined with allowance for clean-up.

Request a Quote

  • This field is for validation purposes and should be left unchanged.

For additional technical data regarding this product, click on the button below.

For our bar fabrication capabilities and services, click on the button below.