Stainless Steels
CENCOR™ TGP - Non-Magnetic, Precision Finish, 300 Series Stainless
Cencor is Precision Turned Ground and Polished
stainless shafting with a 12/15 micro finish. In most
cases it is supplied "near-bearing" fit. Commercial
stainless bars are supplied as; centerless ground, peeled,
or cold drawn. Tolerances on those bars are plus or
minus; may be as much as .007" to .015" over or
under. In most cases additional grinding is required.
That additional grinding causes "walking" and
movement due to induced stress.
Cencor is a Chrome-Nickel-Moly austenitic stainless
suitable for high temperature service to 1600°F. It has
excellent corrosion resistance. Cencor meets or
exceeds criteria for 316/316L Dual Certification.
Cencor offers a higher degree of resistance to scaling,
atmospheric and general corrosion than any of the 300
series austenitic grades. This product also offers a very
high degree of resistance to "creep" at elevated
temperatures and resistance to loss of tensile properties
in applications of operating temperatures between 700°F
and 1600°F.
TYPICAL MECHANICAL PROPERTIES*
|
| Brinell Hardness |
 |
185 BHN |
| Tensile Strength |
|
80,000 P.S.I. |
| Yield Strength |
|
30,000 P.S.I. |
| Elongation |
|
35% |
| Reduction of Area |
|
45% |
*Based on 1/2" Diameter Test Specimen
|
|
English Tolerances*
|
| Up to 1-1/2" Round |
|
(+.000"/-.001") |
| Over 1-1/2" Round to 2-1/2" Round |
|
(+.000"/-.002") |
| Over 2-1/2" Round to 3-1/2" Round |
|
(+.000"/-.002") |
| Over 3-1/2" Round |
|
Call for details |
* Above tolerances are typical.
|
|
Available English Sizes
|
| 3/16" |
3/4" |
1-7/16" |
2-1/8" |
3" |
| 4/4" |
13/16" |
1-1/2" |
2-3/16" |
3-7/16" |
| 5/16" |
7/8" |
1-9/16" |
2-1/4" |
3-1/2" |
| 3/8" |
15/16" |
1-5/8" |
2-3/8" |
3-15/16" |
| 7/16" |
1" |
1-11/16" |
2-7/16" |
4" |
| 1/2" |
1-1/8" |
1-3/4" |
2-1/2" |
4-1/2" |
| 9/16" |
1-3/16" |
1-7/8" |
2-5/8" |
|
| 5/8" |
1-1/4" |
1-15/16" |
2-3/4" |
| 11/16" |
1-3/8" |
2" |
2-15/16" |
|
Metric Tolerances*
|
| Up to 38MM Round |
|
(+.000"/-.001") |
| Over 38MM Round to 60MM Round |
|
(+.000"/-.002") |
* Above tolerances are typical.
|
|
Available Metric Sizes
|
| 5MM |
10MM |
15MM |
20MM |
35MM |
| 6MM |
12MM |
16MM |
25MM |
40MM |
| 8MM |
14MM |
18MM |
30MM |
|
|
Available Lengths
10/13 Foot Random Lengths
Custom Cut-To-Lengths
Cencor™ TGP meets and/or exceeds criteria
for 316/316L stainless dual certification.
Boxing is recommended for all surface critical bar
products.
View our online catalog for PDF brochures on these and other products.
