ASC2250® LDX - (2101 Duplex) Corrosion Resistant, Lean Duplex Stainless Plates & Sheets
(Sheffield™ MDSS Past Protected Trade Name of North American Steel Co.)
Up To 3 Times Stronger Than Type 316L
Corrosion Fatigue Resistance
Excellent Machinability & Weldability
Resistance to Stress Corrosion Cracking (Sulfide and Chloride)
Pitting Resistance (PRE=26) / 316L Stainless = PRE 24 / 304L Stainless = PRE 19
USDA Approved for Food and Dairy
Potable Water Approved (NSF, Section 61)
- Custom Shapes
- Wear Strips
Operating Temperatures 800°F
Consider ASC2250 LDX - Lean Duplex Stainless in applications where operating temperatures do not exceed 800°F. For applications where operating temp. are lower than 800°F, consider ASC2250 LDX to replace; 304L, 316L, 410, 416, and 17-4PH. You will appreciate the increased corrosion resistance, the higher strength and abrasion resistance. And, your machine shop and welders will appreciate the ease of machining, welding and general fabrication. ASC2250 LDX is a "User-Friendly" wear resistant stainless grade that literally provides unlimited applications possibilities.
Increased Wear Resistance
This unique product provides a much higher degree of wear resistance than typical austenitic stainless grades; such as 304L and 316L. ASC2250 LDX will extend service life in corrosive environments where tramp elements may be suspended in a corrosive medium. Dirt, sand, and metallic particles present in recycling operations make short work of lesser stainless grades. The high strength properties of ASC2250 LDX resist abrasion (small particle impact and sliding abrasion); cuts and scratches degrade the surface of other stainless and that contributes to
corrosion and wear.
Pulp & Paper, Chemical Plants, and
ASC2250 LDX is an excellent choice in sour service applications where Stress Corrosion Cracking contributes to failure. Most digesters being made now will have some lean duplex content in the tanks and structures. ASC2250 LDX provides excellent resistance in lower PH.
Plasma Cutting Services
All of our lean duplex stainless steel is cut utilizing a high definition, state of the art plasma cutter. We offer standard tolerances of (+/- 1/16") or better.
Our capabilities include the use of the latest version of AUTOCAD and Blue Print Services to ensure precision and accuracy. Please call our offices for details.
Improved service life where 316L Stainless has been successfully used previously.
View our online catalog for PDF brochures on these and other products.