Wear Products

Ultima™ 501

AR500 (Mod) Abrasion Resistant, “Thru-Hardened” Wear Plate

Ultima™ 501 is furnished at a maximum hardness to resist severe abrasion and moderate impact. Typical hardness range is 475/535BHN. Our AR500 wear plate is manufactured using modern technology which incorporates inclusion shape control, grain refinement, small batch thermal treatment, and low levels of sulfur and phosphorus. Ladle refining desulferizes, and metal slag stirring frees unwanted gases. Micro melt practice and alloy ribbon enrichment means ideal control of analysis and physical properties. Hi-tech rolling procedures mean closer thickness tolerance, better plate density, and superior surface quality. All plates are descaled in the rolling and heat treating process. Carbon Equivalency (CE) of 54. Call or email us for a quote.

This wear plate product is intended for use in applications where a good balance of impact, toughness and abrasion resistance are required. Abrasion resistant steels are typically sold to hardness range and not a fixed chemistry.

Spacing

Features

Abrasion Resistant

Quench & Tempered

Thru-Hardened

Inclusion Shape Control

.

Typical Properties

Hardness475/535 BHN
Elongation in 2″15%
Reduction of Area41%
Grain TypeTempered Martensite
Carbon Equivalency (CE)54

Available Sizes

1/4″
3/8″
1/2″
3/4″
1″
1-1/2″
2″

.

Sheet Sizes

48″ x 96″
48″ x 144″
48″ x 288″
96″ x 144″
96″ x 288″
and Custom Cuts

Spacing

Applications

  • Chain Conveyors
  • Mixer Components
  • Crusher Plates
  • Cutting Edges
  • Shakeout  Liners
  • Chipper Blades
  • Screw Flights
  • Coal Chutes
  • Hammers
  • Wear Guides
  • Screens
  • Truck Bed Liners
  • Wear Rings
  • Inspection Plates
  • Bucket Liners
  • Various Hoppers
  • Fan Blades
  • Levelers
  • Ballistic Targets
  • Impact Pads

Plate Weight Chart

Thickness of PlateWeight Lbs. Per Square InchWeight Lbs. Per Square Foot
1/8″ plate.03655-1/4 #
3/16″ plate.0558#
1/4″ plate.07310-1/2#
5/16″ plate.08312#
3/8″ plate.10815-1/2#
1/2″ plate.14520-3/4#
5/8″ plate.18026#
3/4″ plate.21831-1/4#
1″ plate.29041-1/2#
1-1/4″ plate.36352#
Ultima™ 501 is engineered to perform where a good balance of impact, toughness and abrasion resistance are required. Cutting and Fabrication services offered.

.

Note: Wear plate products are designed for liner applications; they are not intended for use as self-supporting structures or lifting devices.

Ultima™ 501 Wear Plate AR500 Steel
Ultima™ 501 Wear Plate AR500 Steel Ultima™ 501 Wear Plate AR500 Steel

(equivalent to Supra™ HT)

Request a Quote

  • This field is for validation purposes and should be left unchanged.

For our bar fabrication capabilities and services, click on the button below.

Plate Fabrication