Beef Rail

Redi-Rail® (Formerly Kromite® CD60)

Custom Hardened, Precision Finished, Beef Rail

Redi-Rail®  is a specially manufactured, precision “wear rail” component. Hardness can range from Rockwell “C” 38/42 to 55/62 depending upon the size and customer requirements. It is geared to applications in the initial stages of processing where weight is a concern along with wear. Redi-Rail®  can be found in various Meat Packing industries including Beef, Pork & Bison Kill Floors. Its wear resistant properties far exceed that of “cold roll” steels even after further heat treatment is applied. We maintain inventory in Square Edge, Round Edge & Round Cornered bar sizes.

Consideration for Redi-Rail® Beef Rail should be given as an upgrade where materials are used for “precision” wear applications. It is designed to outlast commercial, non-hardened rail stock, extend service life, and reduce down time. Call or email us for a quote.

 

Key Features

Square Edge or Round Edge Bars – Square, “Domed” or Round Corner stock for maximum surface contact and eliminate Shackle Binding.

Straightness Furnished – straightened after thermal treatment to .035″ per 10 feet. (restrictions apply).

Twist and Bow – custom flattened and de-twisted to your exact requirements upon the application.

Depth of Case – as required from .060″ to .125″.

Hardness of Case – Material may be hardened from “38/42” to “55/62” Rockwell “C” depending upon your application

Available Lengths

20/24 Foot Random Lengths, Custom Cut-To-Lengths & Machined Rails upon request.

Available Sizes

Beef Rail

Round Edge “Domed” Q & T Hot Roll
1/2″ x 2-1/2″ x 20/24 Ft Random (with 1/4″ radius corners)

Round Cornered Stock FH
5/8″ x 3″ x 20/24 Ft Random (with 3/16″ radius corners)

Round Edge “Domed” Stock FH
1/2″ x 3″ x 20/24 Ft Random (with 1/4″ radius corners)

Square Cornered Stock FH
1/2″ x 2-1/2″ x 20/24 Ft Random
1/2″ x 3″ x 20/24 Ft Random

Flats
1/4″ x 1″
1-1/4″ x 1-1/2″
1/4″ x 2″
1/4″ x 2-1/2″
1/4″ x 3″
3/8″ x 1″
3/8″ x 1-1/2″
3/8″ x 2″
3/8″ x 2-1/2″
3/8″ x 3″
3/8″ x 4″
3/8″ x 6″
1/2″ x 3/4″
1/2″ x 1″
1/2″ x 1-1/2″
1/2″ x 2″
1/2″ x 2-1/2″
1/2″ x 3″
1/2″ x 3-1/2″
1/2″ x 4″
1/2″ x 5″
1/2″ x 6″
5/8″ x 2″
5/8″ x 3″
3/4″ x 1″
3/4″ x 1-1/2″
3/4″ x 2″
3/4″ x 2-1/2″
3/4″ x 3″
3/4″ x 3-1/2″
3/4″ x 4″
3/4″ x 6″
3/4″ x 7″
1″ x 1-1/4″
1″ x 1-1/2″
1″ x 1-3/4″
1″ x 2″
1″ x 2-1/2″
1″ x 3″
1″ x 3-1/2″
1″ x 4″
1″ x 5″
1″ x 6″
1″ x 7″
1″ x 8″
1-1/4″ x 1-1/2″
1-1/4″ x 2″
1-1/4″ x 2-1/4″
1-1/4″ x 2-1/2″
1-1/4″ x 3″
1-1/4″ x 3-1/2″
1-1/4″ x 4″
1-1/4″ x 5″
1-1/2″ x 2″
1-1/2″ x 2-1/2″
1-1/2″ x 3″
1-1/2″ x 3-1/2″
1-1/2″ x 4″
1-1/2″ x 5″
1-1/2″ x 6″
2″ x 3″
2″ x 4″
2″ x 5″
2″ x 6″
Squares
3/8″
1/2″
5/8″
3/4″
7/8″
15/16″
1″
1-1/8″
1-1/4″
1-3/8″
1-1/2″
1-3/4″
2″
2-1/4″
2-1/2″
3″
3-1/2″
4″
Metrics
25MM x 100MM
25MM x 125MM
20MM Sqr.
25MM Sqr.
30MM Sqr.
40MM Sqr.
50MM Sqr.

Spacing Text to increase spacing.

Kromite® CD60 is the Past Protected Trade Name of Associated Steel Corporation.

Centrak 60 is the past protected tradename of Ludlow Steel Company.

Request Quote

  • This field is for validation purposes and should be left unchanged.

For our bar fabrication capabilities and services, click on the button below.