Posts

Let’s begin this post with two of my favorite words; Ubiquitous; (everywhere, like raindrops during a storm), and, Esoteric; (known by a select small group of people).

What do these mean? Brake Die, Gun Barrel or Rifle Stock, Pump Shaft Straightness, Boat Shaft, Food Service Grade Stainless, Cold Roll, “Ultrasonic Inspect to 388, (and even FDA approved). While they may have a specific meaning to someone (esoteric), they do not have a defined meaning to everyone (ubiquitous in certain industries). In reality these are generic descriptions without reference to defined requirements and properties, at best they are like answering someone’s question regarding the location of your pending vacation by responding; “Up North.”

From my experience, and from a supplier’s point of view, the only real commonality they have is the suggestion of liability. You cannot hope to avoid potential mishap if you really do not have more information on the chemical and physical requirements of the steel the person is discussing.

Brake Die Steel – Generally, a high quality carbon or alloy, appropriate for dies, that may be, or is, hardened. Often an alloy from the 4000 series. Is it pre-machined? Not necessarily. Is it pre-hardened? Not necessarily. Is it oversized square and shiny? Not necessarily.

Food Service Grade Stainless – Generally means it does not contaminate food with residue from the steel and it maintains a clean finish. Most often some grade of stainless. More information is needed.

Gun Barrel and Rifle Stock – Generally a 4000 series high integrity hardened alloy. But, not a specific grade.

Boat Shaft – You really have no information from that term. Could be anything, carbon, alloy, stainless, monel, bronze, etc. Most customers will require specific properties that conform to some sort of Marine Agency such as ABS, etc.

Cold Roll – Not a steel grade but a production method. Need more information.

FDA Approved – A misnomer. FDA does not grant approvals for metals.

Pump Shaft Straightness – The specifics are different for everyone. There are ASTM specifications but many large companies have their own “esoteric” specifications. You need to know more.

Ultrasonic Test 388 – An ASTM test method to determine the internal integrity of steel. Requires more detail such as acceptability and reject-ability levels.

-Howard Thomas, April 22nd 2019