Stainless Steels
ASC2250® LDX
Lean Duplex, High Strength, Bearing-Fit, Stainless Shaft
ASC2250 LDX is a lean duplex stainless steel shafting that exhibits equal parts Austenite and Ferrite. This particular grade will outperform most austenitic grades in a host of critical service applications. It is engineered to resist stress corrosion cracking (SCC), corrosion fatigue, and pitting. The material has a typical hardness of 290 BHN and a typical tensile strength of 94,000 PSI minimum. Call or email us for a quote.
ASC2250 LDX is the newest hybrid of stainless steels offering superior service and high performance for maintenance applications. It combines high chromium, nitrogen, and molybdenum to enhance the corrosion resistance and toughness of the steel.
Agency certifications include USDA approval for dairy processing, (3-A format for sanitary and practice standards; National Sanitation Foundation approval for drinking water applications (NSF Section 61).
Spacing
Features
Stress Corrosion Cracking (SCC) Resistance
Excellent Pitting Resistance (PRE26)
Corrosion Fatigue Resistance
Bearing-Fit, Turned Ground & Polished Finish
Machinable and Weldable
Service Temperature Up To 750°F
Improved Strength Over 304L & 316L Stainless
Sour Service Approved
.
Agency Concurrence
National Sanitation Foundation approval for drinking water applications (NSF Section 6.1).
USDA approval for dairy processing applications (3-A Format for Sanitary and Practice Standards)
.
Typical Properties*
| Hardness | 290 BHN max. |
| Tensile | 94,000 P.S.I. min. |
| Yield | 65,000 P.S.I. min. |
| Elongation in 4D | 35% |
| Reduction of Area | 72% |
*Based on 2″ test piece
.
Available Sizes
3/4″
7/8″
15/16″
1″
1-1/8″
1-3/16″
1-1/4″
1-5/16″
1-3/8″
1-7/16″
1-1/2″
1-5/8″
1-11/16″
1-3/4″
1-15/16″
2″
2-3/16″
2-1/4″
2-3/8″
2-7/16″
2-1/2″
2-3/4″
2-15/16″
3″
3-1/4″
3-7/16″
3-1/2″
3-15/16″
4″
4-7/16″
4-1/2″
4-15/16″
5″
5-1/2″
6″
22MM
25MM
30MM
32MM
40MM
50MM
60MM
70MM
80MM
90MM
3/4″
7/8″
1″
1-1/4″
1-3/8″
1-1/2″
1-3/4″
2″
2-1/2″
2-3/4″
3″
3-1/2″
4″
4-1/2″
5″
5-1/2″
6″
.
Lengths
10/13 Ft. R/L, 20/26 Ft. R/L and Custom Cuts
Typical Diameter Tolerances
| Bearing-Fit TGP ONLY | (-.0005”/-.0015”) |
Boxing is recommended to protect during shipment
Typical Chemical Analysis
| CR | MN | P | N | SI | NI | C | MO | CU |
|---|---|---|---|---|---|---|---|---|
| 22.0 | 5.0 | .04 | .21 | 1.0 | 1.6 | .04 max | .60 max | .1/.8 |
Meets the following specifications: UNS S32101, ASTM A276 and A479, EN 1.4162.
Click here to add your own text
(equivalent to Sheffield™ MDSS)
For additional technical data regarding this product, click on the button below.
For our bar fabrication capabilities and services, click on the button below.
For a downloadable PDF flyer click on the button below.
.
